Chart Attack

The Display/Volume Control
Fusion 430 comes with a Vacuum Fluorescent Display (VFD) and Fusion Black 430
comes with a Liquid Crystal Display (LCD) Display. Both come with a built-in
MCE-compatible IR receiver, and a volume control to work with your media center
computer. Note: These VFD and LCD displays are intended to be compatible with
Microsoft MCE / Vista. The basic features include: System Information, Media
Information, E-mail check, Daily news, City information (weather report), and
graphic equalizer. The IR remote control is not included.



1. Make sure the power supply is off and unplugged before installing any hardware.
2. Connect the 3-pin power cable from the display to the 3-pin connector on the
24-pin ATX main power connector of the power supply. Note: If you choose
to swap the included power supply with another power supply, please call
Antec Customer Service to purchase a special 24-pin Extender with the 3-pin
connector to power the display.
3. The display comes with a 4-pin
internal USB adapter (see picture 3)
and a standard external
USB connector. To power the
display, either:
a)Connect the external connector to a standard USB port, or
b) Check your motherboard USB header pin layout. Match the internal adapter
to your motherboard header. Plug the internal adapter into the external connector
and plug it in to your motherboard’s USB header.
4. Plug in your power supply and turn it on.
5. Boot up your computer.
6. Insert the provided driver CD into your optical drive and install the included software.
7. Restart after the driver has been installed.